538-003 NON-CONFIGURED MAINFRAMES
• 10 Function Slots:
• Includes Rack Slides
• Suitable for OEM applications
• Typically used for sparing
ORDERING INFORMATION
53B-003 – Ten-Slot Non-Configured Mainframe without Power Supply
Specifications
Plug-in Card Positions:
13 total positions:
3 dedicated to Communications, Control, and Chaining;
10 Function card positions.
Installation:
Bench-top or mount in a standard 19-inch NEMA equipment rack.
Cooling. Internal:
Forced air cooling using two 105 CFM AC fans. Typical inlet to exhaust temperature rise is less than 4°C for a fully populated mainframe.
Cooling. External:
When rack mounted, the rack must accommodate a maximum heat load of 350 Watts.
Cooling, Inlet:
The air inlet is through the two fans mounted on the rear panel.
Caution: The mainframe should not be placed so that a vertical or blocking surface is within 3 inches of the rear panel.
Temperature. Ambient:
10°C to +55°C operating.
55°C to +85°C storage
Dimensions: 419.1 mm x 26.7 mm x 469.9 mm (16.75 in. x 10.5 in. x 18.5 in.)
*NOT including rack ears.
Weight:
36 lbs.
Weight, Shipping:
44 lbs.
Output Power Budget (per function slot):
2.0A at 5V dc.
0.30A at +15V dc.
0.30A at -15V dc.
Voltage Requirements:
90-132 or 180-264V ac. switch-selectable. 47 Hz to 440Hz.
Power Requirements:
320 VA worst case, fully loaded.
In-rush (cold start):
30A at 230V for 1/2 cycle.
15A at 115V for 1/2 cycle.
Overload Protection:
Thermal shutdown.
Power Supply Type:
Multiple output switching power supply, 75% typical efficiency.
Power Out:
175W max continuous DC power out.
225W peak DC power out.
Regulation, Line:
+0.25% all outputs over the full AC input range.
Regulation. Load:
+0.25% for 5V dc output, +1% for 15V dc outputs. Minimum load for regulation is 7%. (Minimum load requirements are met when the 53A-171 Card and a communications card are installed.)
PARD:
1% peak to peak. all outputs to 10 MHZ.
Overvoltage Protection:
5V dc output crowbars at 6.25V +5%, +15V dc supplies have preregulated inputs.
Fuses:
The mainframe has three power fuses. Two are located on the rear panel and a 20A type 3AG, is located in the power supply.
Mounting Position:
Any orientation.
Hardware Provided
538-003
47030-54002 Mainframe Slides. (Pair)
47000-54026 Rack Ears (Pair)
Available Options:
OPT 01, delete rack slides, add trim strip.
OPT 05, card clamp.